McAvity Catalog Page 59

	Page 59
`PARTS LIST`
`Sliding Gate Type Fire Hydrants`
`OCTAGONAL BODY STYLE`

DIRECTIONS FOR REMOVING INTERIOR PARTS
Study illustration and become familiar with mechanism.
Shut off water supply to hydrant and open hydrant 2 or 3 turns.
Remove operating nut.
Take off cover by removing two nuts.
Remove packing plate with packing gland complete by taking out the two bolts.
Lift gate assembly by stem. When gate reaches top of hydrant, turn to bring it out through the widest diameter, being careful not to injure face of gate rubber.

DIRECTIONS FOR RE-ASSEMBLING INTERIOR PARTS
Care must be taken to insure the proper location of the gate and drip mechanism which is easily done if instructions are followed closely.
Have Gate Assembly two (2) turns from bottom of thread of stem extension.
Insert Gate Assembly through widest diameter of top, then turn so that face of gate faces inlet of hydrant.
Lower carefully by stem until gate reaches proper seating against face of seat ring.
Screw stem five or six turnes in opening direction to centre drip mechanism in proper location and to relieve gate from seat.
Re-assemble packing plate collar and operating nut.
Open and close hydrant two or three times to assure correct alignment and proper functioning of all parts before turning on the water.

LIST PRICES OF PARTS FOR FIGURE 9658 HYDRANTS

Part No.	PART NAME	4"	5"	Part No.	PART NAME	4"	5"
1	Weather Cap Locknut	.15	.15	21	Gate Rubber	2.00	3.00
2	Weather Cap	3.60	3.60	22	Seat Ring	3.50	4.00
3&5	Cover & Gland Studs & Nuts	Set 1.00	Set 1.00	23	Gate Plate	2.00	2.50
4	Glands	1.70	1.70	24	Gate Plate Nut	.60	.60
6&7	Packing Plate Studs & Nuts	Set 1.25	Set 1.25	25	Wedge Nut	3.60	4.25
8	Packing Plate	10.00	12.00	26	Drip Piece Locknut	.90	.90
9	Cover	4.00	3.50	27	Drip Piece	2.00	2.25
10	Packing Plate Gasket	1.00	1.00	28	Drip Piece Pin	.15	.15
11	Operating Sleeve	7.00	7.00	29	Drip Washer	.30	.30
12	Body*	46.00	54.00	30	Drip Cup	2.00	2.25
13	Stem Complete**	23.00	27.00	31	Drip Bolt	.40	.40
14	Body Bolts and Nuts	Set 1.25	Set 1.50	32	Drip Nut	1.60	1.60
15	Body Gasket	1.60	1.80	33	Hose Nozzle	13.00	13.00
16	Intermediate Section 6"	60.00	65.00	34	Hose Nozzle Cap	7.20	7.20
17	Stem Extension Pins	**	**	35	Pumper Nozzle	20.00	20.00
18	Stem Extension	**	**	36	Pumper Nozzle Cap	10.00	10.00
19	Elbow***	50.00	56.00		Drip Valve Rubber	.40	.40
20	Gate	5.00	6.00		Packing	.60	.60
	Eye Bolt	.60	.60		Gate Plate Leather	.80	.90

* If Body (Part 12) is ordered withhose or pumper nozzles, fitted, price of nozzles must be added, plus labor charge for fitting.
** No. 13, Stem complete includes parts 17 and 18, stem extension and pins.
*** No. 19, Elbow includes No. 22 seat Ring and No. 30 drip cup, leaded in.